Wear Resistant POM Color Masterbatch
PTFE/silicone enhanced POM masterbatch for bearings and sliding parts.
Our wear-resistant POM color masterbatch contains PTFE or silicone additives for enhanced wear resistance. It maintains a low coefficient of friction while providing uniform color for bearings, sliding parts, and high-wear mechanical applications.
Product Features
- Enhanced wear resistance
- Low coefficient of friction
- PTFE or silicone lubrication
- Maintains dimensional stability
- No formaldehyde odor
Typical Applications
Typical Physical Properties
The following data represents typical values for this specific grade. Values may vary slightly depending on color and pigment loading. All tests performed according to referenced ISO/ASTM standards.
Physical Properties
| Property | Test Method | Value |
|---|---|---|
| Carrier Resin | — | POM-C + lubricant |
| Pigment Loading | — | 15-30% |
| Melt Index (190°C/2.16 kg) | ISO 1133 | 5-15 g/10 min |
| Coefficient of Friction (vs. steel) | ISO 8295 | < 0.2 |
| Moisture Content | ISO 15512 | < 0.1% |
Processing Conditions
| Parameter | Value |
|---|---|
| Drying | 80-90°C, 2-3 hours |
| Processing Temperature | 180-210°C |
| Addition Ratio | 2-4% |
| Mold Temperature | 60-100°C |
Color Performance
| Property | Test Method | Value |
|---|---|---|
| Delta E (CIE Lab) | ISO 7724 | < 1.0 |
| Wear Rate (Taber) | ISO 5470 | < 5 mg/1000 cycles |
| Heat Stability | Internal | 5 min @ 210°C |
Disclaimer: The information and technical data provided herein are typical values and are not intended to be used as specifications. Testing is recommended under your own specific processing conditions to confirm suitability. For food-contact or medical applications, please contact us for grade-specific compliance documentation (FDA, EU 10/2011, USP Class VI, ISO 10993).
Other POM Grades
Explore our complete range of pom polyoxymethylene color masterbatch solutions. Each grade is optimized for specific applications and processing requirements.
